Loudspeakers are used by several other speakers and subwoofer components in a lodging house. While most subwoofers are sold separately, you might want to put them in a box or housing for the use of a loudspeaker. Speakers are not difficult to build, but they are very difficult for them, if done properly can contribute to the production of stereo sources. For those who can not so good with arts and crafts of all, definitely before the subwoofer.
What is neededTo build a loudspeaker?
It all depends on your budget and the intention of the cabinet. You must determine the size and materials used. The best material you can use a ¾-inch medium-density edge of the filter. If you have money to spare, you can opt for more exotic materials, but many people use fiber.
In addition to panels of fiber, you'll also need: a jigsaw (the head of a cutting tool), a drill, a spiral, but a little '¾ inches, a router, sandPaper, spray adhesive, solder, and ammunition, and some carpets, if you want to cover the speaker box.
The most subwoofers on the market with a range of optional instructions that help you design a fence for him to come. There is no need to understand the size, when a series of measures already included in the package. In this case, means that you can not design by trial and error, a case, it has the most common specific for the speakers to go.
One important thingunderstand is that if the measures are expressed on an interior measure, you may need to adjust the measures of more than ¾ of an inch.
It 'is also ideal for the desired shape and size measurements on the track rather than a cutting edge filter by hand. Avoid the use of tags can be unattractive to them, if the speaker boxes are not covered with carpet.
For obvious reasons, you must use the jigsaw for the project and not cut with a knife or other cutting tool. TheJigsaw is possible to dry clean and tidy. Once the pieces have been cut, it's a good idea to keep track of where the speakers would be gone. So you need to do this using a router. After using the router to cut the holes, you have to use sandpaper to smooth out the holes.
You should also consider the creation of holes so that cables can pass. If the model has no instructions or notes for holes, it is better to create 2-inchHoles on both sides of the speaker. Always sand with it, so there is no hook when you are finished.
After the holes have been cut, now you can mount the boards together. With screws, nuts and washers, you need to make sure they close and do not rattle. Leave the front of the box last forever, so that at the last moment she works with can be treated.
The next part is easier for all you have to do is, from the subwoofer near the front and connect the power andConnections in.
The real workload is in the construction of the speaker and is being said, you must ensure that the work done up to the precise and accurate.
0 comments:
Post a Comment